DIY coat hanger




If you follow my instagram you might hae seen this. This simple diy coat hanger got it´s inspiration from  Trip Trap  Georg stool and cloth hanger that I posted here. You will only need one t-piece of copper pipe and a copper hat. Also some string, wooden stick, drill and a screw. My wooden stick was 22mm thick and pipe was the same size. First I saw one piece of the stick to be 42cm and then I threaded that piece through the t-pipe. 
After that I sawed a smaller wooden stick ( about 3cm) to go to the top of the t-piece. I drilled the screw from the middle of that top piece so that it will stuck in to the wider wooden piece. I also tied the string arround the screw and then I drilled the screw tightly close. Last I drilled a hole in the middle of that copper hat and threaded the string trough that.